Made in EU | Worldwide Shipping Made in EU | Worldwide Shipping

Automotive

Increase productivity and lifespan of your automotive molds and weld lines

Dry ice blasting can be used for cleaning permanent core molds, such as: panel, seat, tire and gasket molds. ICEsonic dry ice blasting can be used on molds at operating temperatures. There is no need for cooling or removing of the mold. Due to the non-abrasive properties of dry ice, it eliminates wear on molds. ICEsonic dry ice blasting can also effectively cleans auto body welding lines and eliminates the need for manual cleaning and scraping.

Examples

· Weld lines

· Tire molds

· Paint shops

· Engine blocks

· Cylinders/cylinder heads

· Seat molds

Automotive

Surface Preparation

Treat surfaces so they are clean, dry, oil free and ready for further treatment

ICEsonic’s dry ice blasting removes contaminants and build up without any change to the targeted surfaces. Dry ice blasting can be safely performed on a variety of surfaces. Treated surface will remain chemically clean, dry, oil free and ready for further treatment. Dry ice blasting leaves no residue and increases the efficiency of your work.

Recommended Products

Automotive

Rubber Mold Cleaning

Increase the lifespan of your rubber molds and improve product quality

ICEsonic dry ice blasting system enables you to remove the buildup of material and release agents that will cause change in mold geometry. Dry ice cleaning method does not require cooldown of the press or disassembly. This way you can avoid reassembly damages and save time. Non-abrasive properties of dry ice allow frequent maintenance and longer tooling lifespan, at the same time the scrap rate is reduced. Dry ice blasting is a fast and effective cleaning method that reduces cleaning time and labor costs up to 80%.

Recommended Products

Automotive

Coating and Rust Removal

Remove tough contaminants faster with less cleanup costs and still be environmentally friendly

Due to its non-abrasive properties dry ice as blasting media alone is slower in removing stubborn coatings like thick paint, epoxy and rust removal. ICEsonic’s mixed media blasting equipment integrates dry ice with abrasive, such as glass beads, to remove the toughest coating faster and more cost effective. The treated surface will not be pitted or gouged due to the low kinetic energy and is excellent for Non-Destructive Testing (NDT). This technology produces a clean, satin finish to a SA 2.5, SSPC 10 and NACE specification.

Recommended Products

Automotive

Plastic Injection Mold Cleaning

Increase the quality and lifespan of your plastic injection molds

ICEsonic dry ice blasting is a fast, effective and non-abrasive way of cleaning. Due to the dry ice blasting technology, mold cleaning can be performed on an operational mold press at operating temperatures. It is used to clean extruder screws, dies and casts, ovens, mixers, molds and other plastic injection equipment. Dry ice blasting will improve operational efficiency, quality parts and reduce costs.

Recommended Products

Automotive

Operational Equipment Cleaning

Clean machines and electronics during operation to reduce downtime

Dry ice blasting is faster and more effective way of cleaning your operational equipment. ICEsonic dry ice blasting system enables you to remove the buildup from your equipment reducing the risk of breakdown without damaging surfaces. This cleaning method is non-abrasive, does not create secondary waste and is environmentally friendly. It improves preventative maintenance as well as inspection processes. Using ICEsonic dry ice blasting you will note reduction in production downtime and unplanned maintenance.

Recommended Products

Automotive

Composite Tool Cleaning

Safer cleaning of your composite tools with no damage to geometry or dimensions

ICEsonic’s dry ice blasting will not change the dimensions or geometric shape of parting lines and sealing surfaces due to its non-abrasive properties. This way your composite tools and molds will have 5-10 times longer life span. With ICEsonic dry ice blasters you will have up to 70% reduction in cleaning time.

Recommended Products

Automotive

Weld Line Cleaning

Reduce scrap rates and improve the efficiency of your weld lines

ICEsonic dry ice blasting equipment is used for cleaning automated weld lines to improve efficiency and accuracy by removing resin, smoke, oil, spatter and dampering adhesive buildup from production equipment and auxiliary equipment.

Recommended Products

Dry Ice Blasting Benefits

Dry ice blasting is quicker and more effective cleaning process. It reduces the production downtime and scrap amount. ICEsonic dry ice blasting doesn’t create secondary waste which results in reduction of waste disposal costs.

· Decrease cleaning time and costs

· Clean in-place

· Reduce scrap

· Doesn’t create secondary waste

· Employee and environmentally safe

· Prolongs the lifespan of your equipment

How Can We Help?

Our team is happy to answer your questions. Fill out the form and we'll be in touch as soon as possible.

Cookies help us deliver our services. By using our services, you agree to our use of cookies.